STUDY & EXPERIMENTAL INVESTIGATION ON BRICK MANUFACTURING BY USING SLUDGE
AbstractThe growing demand for waste utilization has made solid wastes like sludge and demolition waste an essential composition of this study. The possibility of reduction of the production costs provides a strong logic for use of this waste. Generally sludge, bio degradable materials are dumped in the land, and they decompose over the period of time. This study involves the usage of sludge, construction and demolition waste as an essential ingredient. The sludge was checked for its physical characterization such as bulk density, compressive strength and chemical properties such as water absorption percentage, presence of toxic metals such as Pb, Zn, Cu and Fe for the commercial purpose. The study was performed by using different ratios as 3:2:2:3, 3:2:3:2, 2:3:2:3 of fly ash, cement, sludge and demolition waste respectively for making brick samples. The test results showed a common trait that with the increase in content of sludge, the strength decreased. A maximum compressive strength of 15.88 MPa was achieved for the ratio 2:3:3:2 and a minimum of 11.67 MPa was achieved for 2:1:5:2, respectively.
How to Cite
Jat Shyamsundar Shivraj Singh, P C Diwan. (1). STUDY & EXPERIMENTAL INVESTIGATION ON BRICK MANUFACTURING BY USING SLUDGE. International Journal Of Innovation In Engineering Research & Management UGC APPROVED NO. 48708, EFI 5.89, WORLD SCINTIFIC IF 6.33, 7(7), 07-10. Retrieved from http://journal.ijierm.co.in/index.php/ijierm/article/view/36